H3c-technologies H3C WA2600 Series WLAN Access Points Manual do Utilizador descarregar pdf (Página 18)

7. Mount the AP on the hook on the wall-mounting bracket. See callout 1

in Figure 10.

8. Pull down the

AP with force until it clicks into place. See callout 2

in Figure 10.

Figure 10 Fix the AP ont

o the wall-mounting bracket

Mounting the AP on a ceiling

NOTE:

• The ceiling tiles must be less than 18 mm (0.71 in) thick, and the ceilin

can bear a weight of at least 5 kg (11.02 lb).

• Do not use this method to mount the AP to a location made of

low-intensity materials such as a plaster ceiling. If this installation

method is required in such an environment, put a high-intensity plate

beneath the ceiling to secure the installation.

The three bolt holes shown in Figure 11 are needed for mounting the AP on a

ceiling.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

Sem comentários

H3c-technologies H3C WA2600 Series WLAN Access Points Manual do Utilizador Página 18