H3c-technologies H3C WA2600 Series WLAN Access Points Manual do Utilizador descarregar pdf (Página 16)

Figure 7 Mount the AP on the pole

(1) AP (2) Screw (M6 x 12) (3) Mounting plate (4) V-shaped bracket

(5) Long bolt (6) #10 flat washer (7) #10 spring washer (8) M10 nut

4. Fix the AP onto the mounting plate with screws and fasten the screws. See Figure 7.

NOTE:

You can fix the mountin

plate on the pole with brackets before or after fixin

the AP onto the mountin

plate, whichever is more convenient.

Installing the outdoor antennas

Outdoor antennas fall into directional and omnidirectional antennas. Omnidirectional antennas can be

installed on the AP directly. The following section describes how to install directional and omnidirectional

antennas.

Installing a directional antenna on a pole

NOTE:

Make sure that the location of the pole does not hamper the adjustment of antenna direction and tilt.

Before you install a directional antenna on the pole, make sure that the pole is vertical to the rooftop

surface.

To install a directional antenna:

1. Weld the lightning rod to the tip of the pole.

2. Install the pole on a parapet or cement pier.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 29 30

Sem comentários

H3c-technologies H3C WA2600 Series WLAN Access Points Manual do Utilizador Página 16