H3c-technologies H3C WX5000 Series Access Controllers Manual do Utilizador descarregar pdf (Página 37)

4-2

Figure 4-2 Select the serial interface used for HyperTerminal connection

Step4 Click OK and the system displays the following interface, as shown in Figure 4-3

. On the interface, set

Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None.

Figure 4-3 Set serial port parameters

To use the default settings, click Restore Defaults.

Step5 Click OK and the system displays the HyperTerminal interface.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 84 85

Sem comentários

H3c-technologies H3C WX5000 Series Access Controllers Manual do Utilizador Página 37