H3c-technologies H3C WX5500E Series Access Controllers Manual do Utilizador descarregar pdf (Página 99)

Displaying and maintaining port mirroring

Task Command

Remarks

Display mirroring group

information.

display mirroring-group { group-id | all |

local | remote-destination | remote-source }

[ | { begin | exclude | include }

regular-expression ]

Available in any view.

Port mirroring configuration examples

This section provides port mirroring configuration examples.

Local port mirroring configuration example

Network requirements

On the network shown in Figure 33:

• Device A connects to the marketing department through GigabitEthernet 1/0/1 and to the

technical department through GigabitEthernet 1/0/2. It connects to the server through

GigabitEthernet 1/0/3.

• Configure local port mirroring in source port mode to enable the server to monitor the bidirectional

traffic of the marketing department and the technical department.

Figure 33 Network diagram

Configuration procedure

# Create local mirroring group 1.

<DeviceA> system-view

[DeviceA] mirroring-group 1 local

# Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as source ports, and configure port

GigabitEthernet 1/0/3 as the monitor port.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104

Sem comentários

H3c-technologies H3C WX5500E Series Access Controllers Manual do Utilizador Página 99