H3c-technologies H3C SecPath L1000-A Load Balancer Manual do Utilizador descarregar pdf (Página 26)

Installing FRUs

Installing an interface module

The methods for installing NSQ1GT2UA0, NSQ1GP4U0, and NSQ1XS2U0 are similar. The following

example installs the NSQ1XS2U0 to the F1000-A-EI.

IMPORTANT:

NSQ1XS2U0 can be installed to only slot 1. NSQ1GT2UA0 and NSQ1GP4U0 can be installed to either

slot 1 or slot 2.

To install an interface module:

1. Locate the slot to install the interface module.

2. Loosen the fastening screws on the filler panel with a Phillips screwdriver to remove the filler

panel.

If you cannot remove the filler panel, use a flat-blade screwdriver to pry the filler panel up to

remove it.

Put the removed filler panel and screws in an antistatic bag for future use.

Figure 16 Removing the filler panel

3. Push the interface module with its components facing upwards along the guide rails into the slot.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

Sem comentários

H3c-technologies H3C SecPath L1000-A Load Balancer Manual do Utilizador Página 26