H3c-technologies H3C SecPath F5000-S Firewall Manual do Utilizador descarregar pdf (Página 22)

Figure 8 Securing the firewall to the rack

Grounding the firewall

ARNING!

• Correctly connecting the firewall grounding cable is crucial to li

htnin

protection and EMI protection.

• Do not connect the firewall grounding cable to a fire main or lightning rod.

You can ground the firewall in one of the following ways, depending on the grounding conditions

available at the installation site:

• Grounding the firewall with the grounding terminal on the rack

• Grounding the firewall with a grounding strip

• Grounding the firewall with a grounding conductor buried in the earth ground

Grounding the firewall with the grounding terminal on the rack

To connect the grounding cable:

1. Remove the grounding screw from the firewall chassis.

2. Attach the grounding screw to the ring terminal of the grounding cable.

3. Use a Phillips screwdriver to fasten the grounding screw into the grounding screw hole.

4. Remove the grounding screw from the grounding point on the rack.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 85 86

Sem comentários

H3c-technologies H3C SecPath F5000-S Firewall Manual do Utilizador Página 22