H3c-technologies H3C SecPath F5000-S Firewall Manual do Utilizador descarregar pdf (Página 40)

Figure 27 Login page of the Web interface

NOTE:

user uses the default accon

admin to log in to the Web network mana

ement pa

e for the first time.To

ensure the system security, the user must create a new administrator account and delete the default user

account after logging in.For information about how to create a new administrator account and delete the

default user account, see

H3C SecPath Series Firewalls and UTM Devices Configuration Guide/Getting

Started Guide.

Configuring basic settings for the firewall

The output of the CLI and Web interface might vary depending on the software version.

Configuring basic settings at the CLI

Ste

Command

Remarks

Enter system view. system-view Available in user view.

Set the device name. sysname sysname By default, the device name is H3C.

Enable the Telnet server. telnet server enable

By default, the Telnet server is

disabled.

Enter Ethernet interface view.

interface interface-type

interface-number

N/A

Assign an IP address to the

interface.

ip address ip-address { mask-length |

mask } [ sub ]

By default, GigabitEthernet 0/0

has an IP address

192.168.0.1/24.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 85 86

Sem comentários

H3c-technologies H3C SecPath F5000-S Firewall Manual do Utilizador Página 40