H3c-technologies H3C SecPath F5020 Manual do Utilizador descarregar pdf (Página 40)

[Sysname] interface route-aggregation 3

[Sysname-Route-Aggregation3] quit

# Add GigabitEthernet 1/0/1 and GigabitEthernet 2/0/1 to aggregation group 3

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] port link-aggregation group 3

[Sysname-GigabitEthernet1/0/1] quit

[Sysname] interface gigabitethernet 2/0/1

[Sysname-GigabitEthernet2/0/1] port link-aggregation group 3

[Sysname-GigabitEthernet2/0/1] quit

# Enable BFD MAD on the aggregate interface.

[Sysname] interface route-aggregation 3

[Sysname-Route-Aggregation3] mad bfd enable

# Configure a MAD IP address for each member device on the aggregate interface.

[Sysname-Route-Aggregation3] mad ip address 192.168.2.1 24 member 1

[Sysname-Route-Aggregation3] mad ip address 192.168.2.2 24 member 2

[Sysname-Route-Aggregation3] quit

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 81 82

Sem comentários

H3c-technologies H3C SecPath F5020 Manual do Utilizador Página 40