H3c-technologies H3C SecPath M9000 Series Manual do Utilizador descarregar pdf (Página 72)

Appendix C LEDs

The M9000 gateway series provides a lot of LEDs. You can determine the gateway operating status by

examining the LEDs.

MPU LEDs

Figure 39 shows the LEDs on the MPU.

Figure 39 MPU LEDs

(1) Mana

ement Ethernet port LEDs (2)

Fan LEDs

(3) Card status LEDs (4)

MPU active/standby status LED

Management Ethernet port LEDs

Each MPU has one LINK LED and one ACT LED to indicate the link status and data forwarding status of

the management Ethernet port.

Table 33 Management Ethernet port LED description

LIN

ACT Descri

tion

Steady on Flashing

A link is present, and the management Ethernet port is receiving or

sending data.

Steady on Off A link is present.

Off Off No link is present.

Fan LEDs

Each MPU provides one OK LED and one FAIL LED for a fan tray.

• The M9006 and M9010 gateways each have one fan tray. The LEDs for the fan tray is FAN0.

• The M9014 gateway has two fan trays. The LEDs for the fan trays are FAN0 and FAN1.

Table 34 Fan LED description

FAIL Descri

tion

Steady on Off The fan tray is operating correctly.

Off Steady on The fan tray has failed or is not present.

Off Off The gateway is not powered on.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 97 98

Sem comentários

H3c-technologies H3C SecPath M9000 Series Manual do Utilizador Página 72