H3c-technologies H3C SecPath F100-C-EI Manual do Utilizador descarregar pdf (Página 62)

Installation Manual

H3C SecPath F100-C-EI Firewall

Chapter 5 Maintaining Software

5-12

Enter 1 to configure the network interface parameters (including

the interface in use and the IP address and subnet mask of the

interface) and the TFTP server parameters (including the IP address

of the Ethernet interface on the TFTP server and the file name of the

application program).

Change Download parameter

Download device :WAN

Download file(Max 60 char) :update.bin

IP address of WAN :192.168.1.1

Subnet mask for WAN :255.255.255.0

IP address of the server :192.168.1.2

IP address of the gateway :192.168.1.10

Caution:

z The upgrade should be performed through interface WAN on the

firewall.

z The item “IP address of the server: [192.168.1.10]” must be set to

the IP address of the TFTP server connected to the Ethernet

interface on the firewall.

z You are recommended to configure the IP addresses of the TFTP

server network interface and that of interface WAN on the firewall

into the same network segment.

Step 3: Confirm configuration parameters.

Saving the net configuration, are you sure?[Y/N]

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 78 79

Sem comentários

H3c-technologies H3C SecPath F100-C-EI Manual do Utilizador Página 62